Transmission oil RENA Hypo Ultra 70W-80
Transmission oil RENA Hypo Ultra 70W-80
Synthetic 70W-80 transmission oil for hypoid gears. Instantly lubricates parts in extreme low temperature conditions.
Hypoid gears and drive axles are subjected to extremely high loads and require specialized GL-5 standard lubrication protection. RENA Hypo Ultra 70W-80 is a 100% synthetic oil with an enhanced EP additive package. It retains fluidity at temperatures down to -55°C, instantly lubricating parts during winter start-up and preventing scuffing. The product significantly reduces friction, contributing to fuel consumption optimization. Contact our manager to calculate the cost and conclude a supply contract.
Fully synthetic transmission oil. Kinematic viscosity at 100°C at the level of 9.0 mm²/s, index 120. Pour point is -55°C. Weld load of 3685 N indicates high tribological strength. Meets API GL-5.
Technical Specifications
| Parameter | Value | Test Method |
|---|---|---|
| Density at 20 °C | 0.900 g/cm³ | ASTM D 4052 |
| Kinematic viscosity at 100 °C | 9.0 mm²/s | ASTM D 445 |
| Brookfield dynamic viscosity at -55 °C | 150000 mPa·s | ASTM D 2983 |
| Viscosity index | 120 - | ASTM D 2270 |
| Flash point (open cup) | 180 °C | ASTM D 92 |
| Pour point | -55 °C | ASTM D 97 |
| Mechanical impurities content | Absent % | п. 7.3 |
| Water content | Traces % | ASTM D 95 |
| Sulfur content | ≥0.5 % | ASTM D 6481 |
| Color | 4.0 - | ASTM D 1500 |
| Copper strip corrosion (120 °C, 3 h) | 2с - | ASTM D 130 |
| Foaming at 24 °C / stability | 20/0 ml/ml | ASTM D 892 |
| Foaming at 93.5 °C / stability | 50/0 ml/ml | ASTM D 892 |
| Weld load (4-ball tester) | 3685 N | ASTM D 2783 |
| Sulfated ash content | determination mandatory % | ASTM D 874 |
Density at 20 °C
Value
0.900 g/cm³
Test Method
ASTM D 4052
Kinematic viscosity at 100 °C
Value
9.0 mm²/s
Test Method
ASTM D 445
Brookfield dynamic viscosity at -55 °C
Value
150000 mPa·s
Test Method
ASTM D 2983
Viscosity index
Value
120 -
Test Method
ASTM D 2270
Flash point (open cup)
Value
180 °C
Test Method
ASTM D 92
Pour point
Value
-55 °C
Test Method
ASTM D 97
Mechanical impurities content
Value
Absent %
Test Method
п. 7.3
Water content
Value
Traces %
Test Method
ASTM D 95
Sulfur content
Value
≥0.5 %
Test Method
ASTM D 6481
Color
Value
4.0 -
Test Method
ASTM D 1500
Copper strip corrosion (120 °C, 3 h)
Value
2с -
Test Method
ASTM D 130
Foaming at 24 °C / stability
Value
20/0 ml/ml
Test Method
ASTM D 892
Foaming at 93.5 °C / stability
Value
50/0 ml/ml
Test Method
ASTM D 892
Weld load (4-ball tester)
Value
3685 N
Test Method
ASTM D 2783
Sulfated ash content
Value
determination mandatory %
Test Method
ASTM D 874
Laboratory Services
Recommended Laboratory Analyses
Maximize your equipment lifespan with our state-of-the-art diagnostic services tailored for this specific product category.
| Analysis Title | Category | Price | Details |
|---|---|---|---|
| Viscosity Index (VI) | Motor oils | 1500 | Details › |
| Brookfield Dynamic Viscosity | Gear oils | 1800 | Details › |
| Flash Point by Cleveland Open Cup | Industrial oils | 850 | Details › |
