Motor oil RENA SynTech 0W-30
Motor oil RENA SynTech 0W-30
Premium fully synthetic 0W-30 oil. Provides instant engine lubrication in extreme low-temperature conditions and prevents start-up wear.
Operating vehicles in regions with severe winters requires the use of lubricants with enhanced low-temperature fluidity. Ordinary oils thicken, causing oil starvation and intense wear of engine mechanisms upon start-up. RENA SynTech 0W-30 is a fully synthetic oil that retains fluidity down to minus 40 °C, guaranteeing instant protection against dry friction from the first seconds of operation. The product meets the Mid-SAPS standard requirements, preventing particulate filter contamination. To calculate the cost and place an order, please leave a request on the website or call the manager.
100% synthetic motor oil combining ultra-low winter viscosity and a stable high-temperature film (HTHS ≥ 3.5 mPa∙s). Sulfated ash at 0.8% ensures compatibility with exhaust aftertreatment systems. Meets the strict specifications of API SN and ACEA C3.
Technical Specifications
| Parameter | Value | Test Method |
|---|---|---|
| Kinematic viscosity at 100 °C | 10.9 mm²/s | ASTM D 445 |
| Dynamic viscosity (cranking) at -35 °C | 6200 mPa·s | ASTM D 5293 |
| Pumpability at -40 °C | 60000 mPa·s | ASTM D 4684 |
| HTHS viscosity at 150 °C | ≥3.5 mPa·s | ASTM D 4683 |
| Viscosity index | 150 - | ASTM D 2270 |
| Pour point | -40 °C | ASTM D 97 |
| Total base number (TBN) | 6.0 mg KOH/g | ASTM D 2896 |
| Flash point (open cup) | 200 °C | ASTM D 92 |
| Water content | 0.05 % | ASTM D 95 |
| Phosphorus content | 0.08 % | ASTM D 6481 |
| Noack volatility | 10 % | ASTM D 5800 |
| Sulfated ash content | 0.8 % | ASTM D 874 |
| Foaming at 24 °C / stability | 10/0 ml/ml | ASTM D 892 |
| Foaming at 93.5 °C / stability | 20/0 ml/ml | ASTM D 892 |
| Foaming at 24 °C after 93.5 °C / stability | 10/0 ml/ml | ASTM D 892 |
| Sulfur content | determination mandatory % | ASTM D 6481 |
| Mechanical impurities content | Absent % | п. 7.3 |
| Copper strip corrosion (100 °C, 3 h) | Passes - | ASTM D 130 |
| Density at 20 °C | 900 kg/m³ | ASTM D 4052 |
| Color | 3.5 - | ASTM D 1500 |
Kinematic viscosity at 100 °C
Value
10.9 mm²/s
Test Method
ASTM D 445
Dynamic viscosity (cranking) at -35 °C
Value
6200 mPa·s
Test Method
ASTM D 5293
Pumpability at -40 °C
Value
60000 mPa·s
Test Method
ASTM D 4684
HTHS viscosity at 150 °C
Value
≥3.5 mPa·s
Test Method
ASTM D 4683
Viscosity index
Value
150 -
Test Method
ASTM D 2270
Pour point
Value
-40 °C
Test Method
ASTM D 97
Total base number (TBN)
Value
6.0 mg KOH/g
Test Method
ASTM D 2896
Flash point (open cup)
Value
200 °C
Test Method
ASTM D 92
Water content
Value
0.05 %
Test Method
ASTM D 95
Phosphorus content
Value
0.08 %
Test Method
ASTM D 6481
Noack volatility
Value
10 %
Test Method
ASTM D 5800
Sulfated ash content
Value
0.8 %
Test Method
ASTM D 874
Foaming at 24 °C / stability
Value
10/0 ml/ml
Test Method
ASTM D 892
Foaming at 93.5 °C / stability
Value
20/0 ml/ml
Test Method
ASTM D 892
Foaming at 24 °C after 93.5 °C / stability
Value
10/0 ml/ml
Test Method
ASTM D 892
Sulfur content
Value
determination mandatory %
Test Method
ASTM D 6481
Mechanical impurities content
Value
Absent %
Test Method
п. 7.3
Copper strip corrosion (100 °C, 3 h)
Value
Passes -
Test Method
ASTM D 130
Density at 20 °C
Value
900 kg/m³
Test Method
ASTM D 4052
Color
Value
3.5 -
Test Method
ASTM D 1500
Laboratory Services
Recommended Laboratory Analyses
Maximize your equipment lifespan with our state-of-the-art diagnostic services tailored for this specific product category.
| Analysis Title | Category | Price | Details |
|---|---|---|---|
| Noack Volatility | Motor oils | 1800 | Details › |
| Cold-Cranking Simulator Apparent Viscosity | Motor oils | 1700 | Details › |
| Viscosity Index (VI) | Motor oils | 1500 | Details › |
